Carbide-mining-tools-carbide-mining-tools
- 產品介紹
- 技術參數
- 配置優勢
| Grade | Density | T.R.S | Hardness | Performance & application recommended | Approx grade in China |
| g/cm3 | MPa | HRA | |||
| MK4 | 15.1 | 1800 | 90.0 | Mainly used as small buttons for percussion bits to cut soft and medium hard formations. | YG4C |
| MK6 | 14.9 | 2100 | 90.0 | coring crowns, electric coal drill bits, coal cutting picks, oil cone bits and scraping knife bits, usd in geological prospecting, coal mining and oil well bor | YG6 |
| MK8 | 14.7 | 2400 | 89.5 | For coring crowns, electric coal drill bits, coal cutting picks, cone drill bits and scraping knife bits, used in geological prospecting, coal mining and o | YG6 |
| MK15 | 14.0 | 2500 | 87.5 | Good strength and less wear resistance, for bits of rotary hammer rock drills and heavy rock drills, for hard and very hard rocks | YG15 |
| MK10 | 14.7 | 2450 | 88.5 | Mostly used as the buttons of small and mediumsized percussion bits and as the inserts of rotary prospecting bits to cut soft a | YG8C |
| MK60 | 14.0 | 2500 | 87.5 | Suitable to strips, conical buttons for rotary percussion-resistant, geological prospecting buttons, cut soft and medium hard formations. | YK15 YG9C |
| MK20 | 14.4 | 2550 | 87.0 | Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations. | YK20 YG10C |
| MK25 | 14.5 | 2600 | 87.5 | Primarily for the buttons and inserts of rotary percussion bits to cut medium hard and very hard formations. | YK25 |
| MK30 | 14.4 | 2600 | 87.0 | Largely for the inserts and buttons of percussion bits and tricone bits to cut medium-hard, hard, and very hard formations. | YG11C |
| MK40 | 14.2 | 2650 | 86.5 | Predominatly for the buttons of tricone bits and inserts of rotary percussion bits to cut hard and vey hard formations. | YK40 YG13C |
| MK50 | 14.0 | 2700 | 86.5 | For oil cone drill bits, for medium soft and medium -hard rocks. | YG15C |